Avatar Commands
Avatar control commands
@adjustheight<value>=force
Sets the AvatarHoverOffsetZ debug setting raising or lowering the avatar.
<value> is divided by 100 then applied to the debug setting. This allows for fine adjustments to be made with fewer characters when represented as a string ("3" becomes "0.03", 1 character vs 4), It's not a great saving but every byte counts.
Set AvatarHoverOffsetZ to 0.030
@adjustheight3=force
@edit=<n|y>
Prevent editing objects rezzed in world and attached to the user
- Any active selections will be dropped.
- Edit floater will remain open but switch to the build tab.
- New objects can be placed (from inventory and via build) but the selection instantly drops.
- Terrain can still be edited (terraforming & parcel division).
- Buying objects is not affected.
@fartouch[<distance>]=<n|y>
- <distance> Optional parameter that allows a distance to specified, if omitted default is 1.5m
Limit touching to within the specified radius from the users centre. if set more than once, the lowest distance is in effect.
- The user will be unable to touch, move or edit objects beyond the distance.
- Mouse cursor will not change to indicate objects out of range can be interacted with by touch.
- Edit selections will drop as objects go out of range.
If a distance is omitted, prevents the user touching objects more
NOTE: The distance is not an exception so don't use @fartouch=n followed by @fartouch20=n since that will set the fartouch distance to the default 1.5m instead of the intended 20m
