Avatar Commands

Avatar control commands

@adjustheight<value>[;<factor>][;<distance>]=force

Sets vertical offset raising or lowering the avatar with roughly a -200 to 200 range.

Avatar Z Offset = ( <value> * [<factor>] ) + [<distance>]

• [<factor>] Optional factor defaults to 0.01
• [<distance>] Optional distance that is generally not required.

The following both set the offset to 0.03 @adjustheight3=force @adjustheight0.03;1=force

---

@edit=<n|y>

Prevent editing objects rezzed in world and attached to the user

• Any active selections will be dropped.
• Edit floater will remain open but switch to the build tab.
• New objects can be placed (from inventory and via build) but the selection instantly drops.
• Terrain can still be edited (terraforming & parcel division).
• Buying objects is not affected.

---

@fartouch[<distance>]=<n|y>

• [<distance>] Optional parameter that allows a distance to specified, if omitted default is 1.5m

Limit touching to within the specified radius from the users centre. if set more than once, the lowest distance is in effect.

• The user will be unable to touch, move or edit objects beyond the distance.
• Mouse cursor will not change to indicate objects out of range can be interacted with by touch.
• Edit selections will drop as objects go out of range.

If a distance is omitted, prevents the user touching objects more

NOTE: The distance is not an exception so don't use @fartouch=n followed by @fartouch20=n since that will set the fartouch distance to the default 1.5m instead of the intended 20m