RLVa RFC setsphere

Mode: Pixelate

Command	Value(s)	Description
setsphere_mode	4	Switches @setsphere to pixelate mode
setsphere_param	<width>/<height>/0/0	Specifies the pixelate block size (in pixels) - last 2 params are unused by this mode
setsphere_distmin	<distance>	Sets the distance (in m) at which the effect should start
setsphere_distmax	<distance>	Sets the distance (in m) at which the effect should end
setsphere_distextend	1 or 0	Specify 1 (default) to extend the effect past the maximum distance or 0 to end it
setsphere_valuemin	-	Unused
setsphere_valuemax	-	Unused

Notes

• don't use @setsphere_distextend:1=force with a min/max distance value in this mode; just setting distmin will suffice (see examples)

Example

1. Clear all modifiers and switch @setsphere to 'pixelate' mode

   @clear,setsphere=n,setsphere_mode:4=force

2. Set the block size to 10x10 (everything is pixelated)

   @setsphere_param:10/10/0/0=force

3. Enforce the effect only when >=10m away (only objects >10m away appear pixelated)

   @setsphere_distmin:10=force

4. Tween to a block size of 25x25 in 15 seconds (and then reset the tween duration for following commands)

   @setsphere_tween:15=force,setsphere_param:25/25/0/0=force,setsphere_tween=force

(Step 2) Block size set to 10x10

(Step 3) Inner sphere radius set to 10m

(Step 4) Block size set to 25x25