Avatar Commands

From Catznip
Jump to: navigation, search

Avatar control commands

@adjustheight:<value>[;<factor>][;<distance>]=force

Sets vertical offset raising or lowering the avatar with roughly a -200 to 200 range.

Avatar Z Offset = ( <value> * [<factor>] ) + [<distance>]

  • [<factor>] Optional factor defaults to 0.01
  • [<distance>] Optional distance that is generally not required.


The following both set the offset to 0.03 @adjustheight:3=force @adjustheight:0.03;1=force


@edit=<n|y>

Prevent editing objects rezzed in world and attached to the user

  • Any active selections will be dropped.
  • Edit floater will remain open but switch to the build tab.
  • New objects can be placed (from inventory and via build) but the selection instantly drops.
  • Terrain can still be edited (terraforming & parcel division).
  • Buying objects is not affected.

@fartouch[:<distance>]=<n|y>

  • [<distance>] Optional parameter that allows a distance to specified, if omitted default is 1.5m

Limit touching to within the specified radius from the users centre. if set more than once, the lowest distance is in effect.

  • The user will be unable to touch, move or edit objects beyond the distance.
  • Mouse cursor will not change to indicate objects out of range can be interacted with by touch.
  • Edit selections will drop as objects go out of range.

If a distance is omitted, prevents the user touching objects more

NOTE: The distance is not an exception so don't use @fartouch=n followed by @fartouch:20=n since that will set the fartouch distance to the default 1.5m instead of the intended 20m

Personal tools
Namespaces

Variants
Actions
Catznip
Developer
Second Life™ and Linden Lab™ are trademarks or registered trademarks of Linden Research, Inc. No infringement is intended.
Toolbox